|
All data related to the parts lists are listed here and, if needed, may be supplemented or changed. A change in the geometry, regardless of the nature of the change, results in an automatic re-calculation of the data. It is also possible to record additional information such as notes, shipping number, item number, etc. |
 |
 |
|
Position The position and the insertion point of a shape may be changed even after the insertion process. This allows the repositioning of an incorrectly inserted shape to its correct position. Of course, all associated joints are taken into account and updated (see logical links). |
 |
| |
|
Drill Holes All drill hole drawings and parameters such as insertion point, drill diameter, position, etc. contained in a shape can be directly modified and visually displayed here. |
|
| |
|
Cuts Diagonal cuts of a shape can here be manipulated after the cuts have been placed. For example, a cut with an angle of 33.48 degrees created "freehand" can be corrected to 30 degrees by editing the value of the dialog box. |
 |
| |
|
|
Polygonal cutout geometries are modified or deleted using the "grips." |
 |
| |
|
|
Parametric gaps or notches are called outlets. Their values may be modified at any time.
|
 |
